R&TTE Directive 1999-5-EC

The R&TTE Directive applied to "radio equipment"to equipment being placed on the market.
and "telecommunications terminal equipment"The R&TTE Directive covers 3 mains areas:
("TTE"), where:Articles 3.1a, Safety: electrical safety requirements
- Radio Equipment is a product capable ofare similar those of Low Voltage Directive but
communication by emission or reception of radiowith no lower voltage limit; and human exposure
waves. Sound and TV broadcast receptionto EM fields
equipment is exempt, as is equipment used byArticle 3.1b, EMC: requirements similar to the EMC
radio amateurs and equipment covered by theDirective. It should be noted that most
Marine Equipment Directive.Harmonised EMC standards for radio products
- TTE is a product enabling communication andrequire a Radiated Spurious Emissions
intended to be connected to the publicmeasurement to be performed in place of an
telecommunications network.Radiated Emissions measurement (e.g. 55022)
This article will concentrate on Radio Equipment,Article 3.2, Radio Spectrum: This part requires
which falls into two classes:efficient use of the radio spectrum.
Class 1 radio equipment may be placed on theManufacturers may only self declare after they
market and put into service without restriction -have fully applied all relevant harmonised
equipment that operates in a frequency bandstandards.
which is harmonised across Europe.For products with many variants, or products
Class 2 radio equipment is everything else -operating in more than one frequency band or
equipment that operates in a frequency bandoffering more than one service, careful test
which is not harmonised across Europe. The CEplanning together with a draft Technical
mark for Class 2 equipment must beConstruction File and a Notified Body Opinion, is
accompanied by an "!" mark and the relevant EUoften a quicker and cheaper route to market.
radio spectrum authorities must be notified prior